Due to a high volume of interest, Sneak-O-Leak pre-ordering is now a waitlist, with fulfillments beginning in early May.
Takes <15 minutes to install.
Quick Setup
Lets you stay in your hunt longer.
Longer Hunts
Longer hunts mean better odds for a successful hunt.
Increased Odds
Suitable for male and female use.
Comfort for All
Reduce waste and repurpose your old garden hose
Green Reuse
4 EASY STEPS TO INSTALL
Verify your mounting height based on users and secure the Seak-O-Leak to the wall or surface as desired.
1. Mount unit to the wall
Select and trim a standard garden hose (we recommend repurposing an old hose) to fit your setup, ensuring optimal length from the mounting point to the ground. Connect the prepared hose ends together and to the spout of your Sneak-O-Leak. Slide the cut end of your hose over the bottom spout of the Sneak-O-Leak in preparation for the next step.
2. Prep a hose for attachment
Create an access point with a hole saw and route the hose through it, guiding it to the desired end point. You may secure the hose with zip ties along its route and bury its head at the final location, if desired.
3. Drill hole and feed hose to desired location
This is an optional step to bury the end of the hose in a small gravel basin in order to help eliminate exposure and ensure drainage.
4. Bury hose in desired location (Optional)
YOUR INSTALLED SNEAK-O-LEAK
COMPATIBLE WITH ALL ELEVATED HUNTING BLINDS
OTHER APPLICATIONS
Garages & Workshops
Campsites
Tree Houses
Your Ideas
FAQ
A Sneak-o-Leak funnel is 6" W x 12" H x 8" D
No. Our goal is to reduce unnecessary landfill waste by encouraging the repurposed use of old garden hoses (Standard 5/8”). These are the recommended materials and tools for installation (not included):
-
Power drill
-
1" hole saw bit
-
(2) #8 x 1/2" screws
-
Razor blade or knife (for cutting the hose)
-
Ball valve (optional)
-
Hose filter (optional)
-
Watch the video below for a guided install, and download the full instructions here.
No -- make sure you only use a Sneak-O-Leak for liquids.
We recommend rinsing the unit after each use with a splash of water and seasonally pouring a sanitizing cleaner to flush the system clean.
Currently we do not ship outside of the U.S., but we still encourage international parties to submit an inquiry via our waitlist form so we can notify you if this changes in the future.